Bending Pliers For Photo Etched Parts
TAMIYA Bending Pliers For Photo Etched Parts
TAMIYA 74067
To προιόν αυτό βρίσκεται σε στοκ στο κατάστημα Νέας Σμύρνης ,τηλ:210-9348077
There are 83 products.
TAMIYA Bending Pliers For Photo Etched Parts
TAMIYA 74067
To προιόν αυτό βρίσκεται σε στοκ στο κατάστημα Νέας Σμύρνης ,τηλ:210-9348077
Mr.Hobbby Cap Opener Εργαλειο για ανοιγμα χρωματων Gunze -Tamiya
Mr.Hobby GT-56
Εργαλειο για ανοιγμα χρωματων Gunze -Tamiya Mr.Hobby GT-56
TAMIYA Cutting Mat A3 Half-Size/Blue
TAMIYA 74144
The 145mm x 450mm surface area has front printed grid, increment angles, standard and scale conversion rulers, curved and circular markings, and a plain reverse side.
Thickness: 2mm.
Dimensions: 220mm x 300mm x 2mm thickness.
The surface area slightly exceeds A4 in length and width.
• Made from semi-transparent blue-green resin with virtually zero odor.
TAMIYA Decal Adhesive
TAMIYA 87176
Use this handy solution to apply decals which have been left too long in water and lost their adhesion. ★Simply apply to the surface of the model, and use water to remove any excess adhesive. ★Features handy brush on reverse side of cap for application. 10ml bottle.
TAMIYA Decal Adhesive Softener Type
TAMIYA 87193
This product both softens decals and improves their adhesion to the target surface, also helping to avoid silvering. ★Contents: 10ml. Cap features an applicator.
TAMIYA Epoxy Putty Smooth Surface TAMIYA (25g)
TAMIYA 87052
TAMIYA Finishing Abrasive P240 - 3pcs SANDING PAPER 240 GRIT
TAMIYA 87093
TAMIYA Finishing Abrasive P320 - 3pcs SANDING PAPER 320 GRIT
TAMIYA 87094
TAMIYA FINISHING ABRASIVES MEDIUM SET
Contains two P180, one P240 and two P320 sheets.
TAMIYA LIQUID SURFACE PRIMER – WHITE 40mL
TAMIYA 87096
Mark Fit enables perfect decal applications. It softens decals so they can easily fit to uneven, rounded, and matt finish surfaces of plastic models while increasing adhesion. The bottle's cap comes with a convenient brush. 1 bottle contains 40ml.
TAMIYA 87102
TAMIYA Masking Tape for Curves 12 mm width, 20 m length
TAMIYA 87184
Mr.Hobby MC-131
A new type of "BRUSH ON" type cement, with improved drying speed and adhesive strength! It is suitable for attaching fragile pastic parts together quickly. You must put together the plastic parts, and then brush on this cement on the gap between the two parts.
Mr. Finishing Surfacer 1500 gray 40 ml
MR.HOBBY SF289
Mr.Hobby SF287
This is a surfacer with primer (base filling paint).
The material used in Surfacer 1000, which is gaining overwhelming popularity for plastic models has been improved for this product.
Surface attachment has been enhanced not only for plastic models but also for metal in etched parts and resin.
Spray type and bottle type are available. Color is gray.
MR.HOBBY Mr.Dissolved Putty
MR.HOBBY P119
Mr.Dissolved Putty is a highly effective liquid sealant putty with even better viscosity than Mr.Surfacer 500.This product makes sealing rough sections of plastic models incredibly easy.
Mr.FINISHING SURFACER 1500 WHITE
MR.HOBBY SF291
Mr.Surfacer 1000
MR.HOBBY B519
Mr.SURFACER 1000 contains finer granules than Mr.SURFACER 500. They are both used in much the same way but ,due to the finer granules after sanding with waterproof sand-paper , a perfectly corrected surface is possible. Available in bottle and spray.
MR.WHITE PUTTY R
Mr.White Putty R is a low viscosity version of Mr.White Putty. Because of the reduced viscosity, it is easier to apply to a small area compared with the existing product. After it has hardened, it provides a smooth cutting quality extremely close to the original plastic model material.
Mr.Hobby Paint Tray 10pcs
Μεταλλικά Δοχεία για Ανάμειξη Χρωμάτων Η συσκευασία περιέχει 10 τμχ
TAMIYA Polishing Compound Coarse (22ml)
TAMIYA 87068
TAMIYA Polishing Compound TAMIYA - Fine (22ml)
TAMIYA 87069
This paste polishing compound uses small particles for the kind of finely-polished, smooth surface that is required before applying your model's topcoat. It can also be used to clear up any scratches on transparent parts. and it can be washed away using water when the job is finished.
TAMIYA Spray-Work Painting Stand Set
TAMIYA 74522
Mr.SURFACER 1200
Mr.Hobby SF286
Mr.SURFACER 1200 contains finer granules than Mr.SURFACER 1000. They are both used in much the same way.
TAMIYA 87051
This putty consists of white putty and a beige hardener, and dries in 5-6 hours at room temperature. Use it for parts you want to set quickly. Contents: 25g.
This putty consists of white putty and a beige hardener, and dries in 5-6 hours at room temperature. Use it for parts you want to set quickly
TAMIYA 87143
TAMIYA Weathering Sponge Brush - Medium
TAMIYA 87083
TAMIYA Bending Pliers mini (For Photo-Etched Parts)
TAMIYA 74084
TAMIYA BENDING TWEEZERS FOR PHOTO ETCHED PARTS
TAMIYA 74117
TAMIYA Mark Fit (Strong)
TAMIYA 87135
Compared to the standard Mark Fit (Item 87102), this "strong" version has a more powerful formula for softening decals. ★It will help decals adhere and conform to difficult curved surfaces or matte-painted surfaces. In addition, it could also help speed up the decal application process. ★Bottle cap comes with brush applicator. Bottle contains 40ml.
May cause damage to painted surface in some cases, particularly surfaces painted with acrylic paints.
TAMIYA Mark Fit (Super Strong)
TAMIYA 87205
Mark Fit (Super Strong) is a more powerful formula than other Mark Fit products. ★Use it to help fit decals to tricky surface shapes, for a great finish achieved in quick time! ★Helps protect from silvering after adhesion. ★Comes in a 40ml bottle with brush on the cap. ★Take care when using as it may melt affect painted surfaces (especially acrylic paints)
TAMIYA Masking tape 10mm
TAMIYA 87034 Ταινία μασκαρίσματος 10mm
Ταινία μασκαρίσματος 18mm Tamiya Masking tape 18 mm
TAMIYA 87035
Ταινία μασκαρίσματος 6mm
Tamiya Masking tape 6 mm
TAMIYA 87033
TAMIYA Masking Tape w/Plastic Sheeting 150mm
TAMIYA 87203
Mr.Hobby Mr. Mark Softer NEO (40 ml) (Decal Softener)
Mr.Hobby MS-233