FINE PRIMER GREY SPRAY

TAMIYA XF-76 Gray Green 10ml TAMIYA XF-76

CREATEX Gold Chrome 60ml

CREATEX W358

Pearlescent and metallic base colors that spray semi-opaque out-of-the-bottle, with a 0.5mm airbrush tip-size. Thin with 4011 Reducer for increased transparency and use with smaller airbrush tip-sizes down to 0.3mm.

Vallejo Middlestone RAL 1020

Vallejo 882

CREATEX Metallic Blue Silver 60ml

CREATEX W364

Pearlescent and metallic base colors that spray semi-opaque out-of-the-bottle, with a 0.5mm airbrush tip-size. Thin with 4011 Reducer for increased transparency and use with smaller airbrush tip-sizes down to 0.3mm.

AK Interactive AK11363 FRENCH ARMY DESERT SAND – AFV FS 17178

Createx Transparent Sunrise Yellow

Createx 5113

Vibrant colors which do not have fillers for opacity. Transparent Colors most often work best over a light surface or base color such as Opaque White. Transparent Colors have a high pigment load for semi-opaque coverage out of the bottle and may be reduced with 5601 Transparent Base or 4012 High Performance Reducer to increase transparency and assist flow & atomization with smaller airbrush tip-sizes. Add 4030 Mix Additive to Createx Airbrush Colors for improved spray performance and adhesion on plastic, vinyl and application onto hard-surfaces.

AK Interactive  AK11340 Nº13 DESERT SAND (FS 30279) AFV

ZERO PAINTS Anaconda Green Dodge Viper

ZERO PAINTS 1409AG

Zero Paints are pre-thinned for Airbrush use. Shake container until paint is thoroughly mixed. Spray at 15 - 40 psi,
3 - 4 medium cross coats are recommended. Air drying at 20°C Dust-free: 5 – 10 mins, Tack-free: 20 - 30 mins. 

GREEN STUFF WORLD Chameleon NEBULA COPPER

GREEN STUFF WORLD 1558

Chameleon metal paints will create a colourshift visual effect depending on the viewing angle. Valid for brush and airbrush.
Best results will be obtained with Airbrush.

Product in spray with a grey tone special for priming metal parts featuring a high opacity once dry. This spray primer can be applied directly over metal, is ultraresistant and with the best adherence. Clean and degrease the metal parts to be painted. The paint is a synthetic lacquer that cures in a short period of time. Easy to apply, the primer of metal parts will become simple and more effective. Before using you will need to shake the spray well, at least a minute to get a good mixture. Paint with the can in vertical position in fast and thin coats at a distance of about 25 cm., allowing to dry for 5 minutes between layers

AK INTERACTIVE    AII Green AIR

AK INTERACTIVE 11909

Latest generation colors, with a new technologically superior formula to paint with a brush and airbrush, avoiding the traditional clogs when diluted.