Bending Pliers For Photo Etched Parts
TAMIYA Bending Pliers For Photo Etched Parts
TAMIYA 74067
To προιόν αυτό βρίσκεται σε στοκ στο κατάστημα Νέας Σμύρνης ,τηλ:210-9348077
There are 54 products.
TAMIYA Bending Pliers For Photo Etched Parts
TAMIYA 74067
To προιόν αυτό βρίσκεται σε στοκ στο κατάστημα Νέας Σμύρνης ,τηλ:210-9348077
TAMIYA Cutting Mat A3 Half-Size/Blue
TAMIYA 74144
The 145mm x 450mm surface area has front printed grid, increment angles, standard and scale conversion rulers, curved and circular markings, and a plain reverse side.
Thickness: 2mm.
Dimensions: 220mm x 300mm x 2mm thickness.
The surface area slightly exceeds A4 in length and width.
• Made from semi-transparent blue-green resin with virtually zero odor.
TAMIYA Decal Adhesive
TAMIYA 87176
Use this handy solution to apply decals which have been left too long in water and lost their adhesion. ★Simply apply to the surface of the model, and use water to remove any excess adhesive. ★Features handy brush on reverse side of cap for application. 10ml bottle.
TAMIYA Decal Adhesive Softener Type
TAMIYA 87193
This product both softens decals and improves their adhesion to the target surface, also helping to avoid silvering. ★Contents: 10ml. Cap features an applicator.
TAMIYA Epoxy Putty Smooth Surface TAMIYA (25g)
TAMIYA 87052
TAMIYA Finishing Abrasive P240 - 3pcs SANDING PAPER 240 GRIT
TAMIYA 87093
TAMIYA Finishing Abrasive P320 - 3pcs SANDING PAPER 320 GRIT
TAMIYA 87094
TAMIYA FINISHING ABRASIVES MEDIUM SET
Contains two P180, one P240 and two P320 sheets.
TAMIYA LIQUID SURFACE PRIMER – WHITE 40mL
TAMIYA 87096
Mark Fit enables perfect decal applications. It softens decals so they can easily fit to uneven, rounded, and matt finish surfaces of plastic models while increasing adhesion. The bottle's cap comes with a convenient brush. 1 bottle contains 40ml.
TAMIYA 87102
TAMIYA Masking Tape for Curves 12 mm width, 20 m length
TAMIYA 87184
Milliput Epoxy Putty - Turquoise Blue
Milliput Epoxy putty Standard Yellow - Grey
Εποξικός Στόκος δυο συστατικών 113.4g
Milliput Super Black
Each package contains two separate bars, one of which is a hardener. Upon mixing an equal quantity of each different bar the material starts to harden, and hardens fully in 90 minutes, after which it can be carved, sanded, drilled, and sculpted over.
Milliput Superfine White
Το Milliput Superfine White είναι ένας εξαιρετικός εποξικός στόκος για την αποκατάσταση κεραμικών, πορσελάνη, κορνίζων και χρησιμοποιείται ακόμα και για μοντελιστικές ιδιοκατασκεύες
Τα δύο μπαστούνια ανακατεύονται 50/50 και ο στόκος στεγνώνει εντελώς εντος 2-3 ώρων. λίγα λεπτά.
Ο στόκος γυαλοχαρτίζεται, τρυπιέται, βάφεται.
TAMIYA Polishing Compound Coarse (22ml)
TAMIYA 87068
TAMIYA Polishing Compound Finish (22ml)
TAMIYA 87070
TAMIYA Polishing Compound TAMIYA - Fine (22ml)
TAMIYA 87069
This paste polishing compound uses small particles for the kind of finely-polished, smooth surface that is required before applying your model's topcoat. It can also be used to clear up any scratches on transparent parts. and it can be washed away using water when the job is finished.
TAMIYA Sharp Pointed Side Cutter for Plastic (Slim Jaw)
TAMIYA 74123
TAMIYA Spray-Work Painting Stand Set
TAMIYA 74522
TAMIYA 87051
This putty consists of white putty and a beige hardener, and dries in 5-6 hours at room temperature. Use it for parts you want to set quickly. Contents: 25g.
This putty consists of white putty and a beige hardener, and dries in 5-6 hours at room temperature. Use it for parts you want to set quickly
TAMIYA 87143
This new products has a quicker setting time than standard Tamiya Extra Thin Cement.This cuts the amount of time used in constructing models, and has the advantage of a cleaner finish. The bottle cap features a handy applicator brush.
TAMIYA 87182
TAMIYA Weathering Sponge Brush - Medium
TAMIYA 87083