FOAM SAFE GLUE
50ml
FOAM SAFE
For rapid foam modelling. Very high tack glue. Strong hold, allows adjustment.
Dries clear, flexible. Ideal for foam model aircraft. Bonds: Depron, white, blue and EPO foams, wood and plastic.
There are 28 products.
50ml
FOAM SAFE
For rapid foam modelling. Very high tack glue. Strong hold, allows adjustment.
Dries clear, flexible. Ideal for foam model aircraft. Bonds: Depron, white, blue and EPO foams, wood and plastic.
DELUXE MATERIAL Perfect Plastic Putty 40ml
Fills fine gaps.
Creates invisible seams. Water clean up.
Perfect Plastic Putty is a one-part, fast-drying, superfine filler with good adhesion and sanding properties on plastic. Easily used, even in awkward areas with water clean up. Apply with small spatula, smooth and allow to dry.
Perfect Plastic Putty:
DELUXE MATERIAL Sand 'n' Seal Wood Grain Sealer 250ml
A specially formulated wood grain sealer.
Coats and seals wood grain prior to painting and finishing. Use with all types of paints including enamel, cellulose, acrylic or epoxy.
Stir well before use. Apply with brush and allow to dry.
Sands beautifully after 60 mins.
Clean brushes with water.
Economical in use.
Low odour and non-flammable. Covers 1.5 sq metres.
DELUXE MATERIAL Roket cyano range
Highest quality cyanoacrylate adhesives.
All sold as 20g bottles.
Roket Hot: Super-thin, fast, penetrating adhesive; sets 1-5 sec.
Designed for use with precise Micro Tip anti-clog applicator (AC9).
DELUXE MATERIAL Roket cyano range
Highest quality cyanoacrylate adhesives.
All sold as 20g bottles.
Roket Odourless: Thick, maximum gap-filling adhesive; sets 10-20 sec.
Designed for use with precise Micro Tip anti-clog applicator (AC9).
DELUXE MATERIAL Aeropoxy Laminating Resin300g pack.
Super thin epoxy for wing skinning, laminating and moulding.
Use with lightweight glass cloth to add strength and toughness to models.
DELUXE MATERIAL Eze Dope 250ML
A specially formulated water soluble dope for shrinking, strengthening and wind-proofing model tissue paper.
It is non flammable, has little odour and dries rapidly to a semi-matt finish. Use to apply tissue decoration to all types of foam.
250ml top up bottle
Spray which permits Roket CA (AD43-46) to bond difficult surfaces and accelerate the cure.
Pre-condition surfaces and then apply Roket CA (AD43-46) for instant bond.
Precision, Fine glue lines,
Instant fit- Anti clog- No mess.
one piece glue tips for the accurate application of Deluxe Materials glues : Roket cyano, Roket Card, Super’Phatic! glue. Tips can be shortened or stretched for finer application.
Highest quality cyanoacrylate adhesives.
All sold as 20g bottles.
Roket Max: Thick, maximum gap-filling adhesive; sets 10-20 sec.
Designed for use with precise Micro Tip anti-clog applicator (AC9).
100ml
Spray glue for the attachment of scenic materials, eg. scatter to trees or baseboards etc.
Non-staining. Dries clear and tacky. Gentle spray action.
A new range of high strength, rapid setting, epoxy glues that are formulated to set hard, clear and sandable, and tolerate mixing ratio errors. Packed in attractive boxes, each bottle has a new ‘witches hat’ free flowing nozzle with matching over-cap to match the label.
Multi-purpose gap-filling canopy glue. Thick & tacky, dries clear, remains flexible. Bonds combinations of wood, plastic, fabric, foil, painted surfaces. Ideal for:
Aeroplane canopies
Model boat plastic windows
Sealing gaps & small holes
Repairing tears in covering film
Application of rivets on scale models.
50ml
For fast assembly of card models eg. railway buildings and rockets.
Also bonds balsa wood, paper and card to most plastics. Use sparingly, align and press parts together for instant bond. Water clean up.
Pack of six micro tips and PTFE tubing for precise anti-clog application of Roket CA glues (AD43-46).
50ml spray bottle
Spray which permits Roket CA (AD43-46) to bond difficult surfaces and accelerate the cure.
Pre-condition surfaces and then apply Roket CA (AD43-46) for instant bond.
A new range of high strength, rapid setting, epoxy glues that are formulated to set hard, clear and sandable, and tolerate mixing ratio errors. Packed in attractive boxes, each bottle has a new ‘witches hat’ free flowing nozzle with matching over-cap to match the label.
Debonder and dissolver of superglue.
Releases bonded skin and removes superglue stains. Stays on site for faster debonding action.
50ml
For making crystal clear windows and bonding canopies and most plastics
Bonds wood, plastic, metal, painted surfaces. For glazing windows up to 6mm. Use with micro-tips.
Plastic Magic 10 sec cement is a thin liquid plastic cement with a 10-15 sec adjustment time & non-clog action.
It is non-toxic, non-flammable with minimal odour and almost zero emissions when compared to competitors.
It bonds: styrene, plastic card, ABS & most kit plastics. It can be applied to one or both surfaces which can then be adjusted to a perfect position.
51g/sq m (1 sq metre)
For laminating.
Unique fabric finish for better “wetting out” and strength. Use with Eze-Kote or Aeropoxy
240ml pack, Balsa Tint.
Strong, lightweight filler which sands easily.
Use only where a strong joint is not required. Use for grain filling by applying with plastic sponge. Bonds: wood, foam, fibreglass. White or balsa tint for use in aeromodelling under clear covering film.
240ml
The next generation of strong lightweight fillers for foam and wood.
An easy sanding, strong, lightweight filler designed to fill small gaps and indentations. Easily applied and smoothed with a damp finger and then sanded back. Does not crumble like other lightweight fillers and can be over-coated with Foam Armour (BD50) for improved surface toughness, and finish before being painted.
500ml
Laminating and finishing resin for balsa and foam models.
Eze-Kote is a 1-part water based foam-safe, low odour, resin alternative to epoxy. Brush onto balsa and light glass cloth to create a tough, ding and fuel resistant film that can be sanded easily and painted after 20-30 mins.
Coverage: 75ml covers approx
1m2 /coat
A lightweight, non-sagging scenic modelling material for the creation and casting of realistic diorama groundwork.
Create and Shape can be moulded and smoothed with a soft wet brush before completely dry.
It dries without cracking to a material with great structural integrity bonding wood, plaster, plastic, foam etc. It can be cut, sawn and filed to shape when dry without crumbling like other products and then glued and coloured with acrylic for beautiful scenic effects. Ideal for repairs and special scenic projects where strength and durability is required.
78g/sq m (1 sq metre)
For laminating.
Unique fabric finish for better “wetting out” and strength. Use with Eze-Kote or Aeropoxy.
DELUXE MATERIAL Liquid Gravity 240g pack
A brand new non-toxic, easy flowing, weighting system for scale military models, railway rolling stock, model planes, boats and cars. Specially designed to pour into small cavities and set in place with your favourite Roket cyano (AD43-46), or Speed Epoxy.
Use to improve electric conductivity and stability of rolling stock, adjust balance point of model planes, boats & submarines. 50ml bottle weighs almost 0.25 kilo!
Low odour, liquid plastic cement with pin- point applicator
Hazard- free, non-toxic, plastic cement with a needle applicator.