There are 54 products.
DELUXE MATERIAL Aeropoxy Laminating Resin300g pack.
Super thin epoxy for wing skinning, laminating and moulding.
Use with lightweight glass cloth to add strength and toughness to models.
DELUXE MATERIAL Aliphatic Resin 500g
Famous “yellow” wood glue used in aeromodelling and professional applications where hard woods are used; dries crisper than PVA giving better sanding specially with balsawood.
Will not pull joints as it sets, resulting in better dimensional stability important for airframe construction.
Also sets at low temperatures and is water resistant making it ideal for model boats.
Use in miniature furniture making where its useful properties include:
• Taking a stain.
• Faster grab time
Multi-purpose gap-filling canopy glue. Thick & tacky, dries clear, remains flexible. Bonds combinations of wood, plastic, fabric, foil, painted surfaces. Ideal for:
Aeroplane canopies
Model boat plastic windows
Sealing gaps & small holes
Repairing tears in covering film
Application of rivets on scale models.
Mr.Hobbby Cap Opener Εργαλειο για ανοιγμα χρωματων Gunze -Tamiya
Mr.Hobby GT-56
Εργαλειο για ανοιγμα χρωματων Gunze -Tamiya Mr.Hobby GT-56
A lightweight, non-sagging scenic modelling material for the creation and casting of realistic diorama groundwork.
Create and Shape can be moulded and smoothed with a soft wet brush before completely dry.
It dries without cracking to a material with great structural integrity bonding wood, plaster, plastic, foam etc. It can be cut, sawn and filed to shape when dry without crumbling like other products and then glued and coloured with acrylic for beautiful scenic effects. Ideal for repairs and special scenic projects where strength and durability is required.
50ml spray bottle
Spray which permits Roket CA (AD43-46) to bond difficult surfaces and accelerate the cure.
Pre-condition surfaces and then apply Roket CA (AD43-46) for instant bond.
250ml top up bottle
Spray which permits Roket CA (AD43-46) to bond difficult surfaces and accelerate the cure.
Pre-condition surfaces and then apply Roket CA (AD43-46) for instant bond.
DELUXE MATERIAL Eze Dope 250ML
A specially formulated water soluble dope for shrinking, strengthening and wind-proofing model tissue paper.
It is non flammable, has little odour and dries rapidly to a semi-matt finish. Use to apply tissue decoration to all types of foam.
500ml
Laminating and finishing resin for balsa and foam models.
Eze-Kote is a 1-part water based foam-safe, low odour, resin alternative to epoxy. Brush onto balsa and light glass cloth to create a tough, ding and fuel resistant film that can be sanded easily and painted after 20-30 mins.
Coverage: 75ml covers approx
1m2 /coat
51g/sq m (1 sq metre)
For laminating.
Unique fabric finish for better “wetting out” and strength. Use with Eze-Kote or Aeropoxy
78g/sq m (1 sq metre)
For laminating.
Unique fabric finish for better “wetting out” and strength. Use with Eze-Kote or Aeropoxy.
50ml
FOAM SAFE
For rapid foam modelling. Very high tack glue. Strong hold, allows adjustment.
Dries clear, flexible. Ideal for foam model aircraft. Bonds: Depron, white, blue and EPO foams, wood and plastic.
Debonder and dissolver of superglue.
Releases bonded skin and removes superglue stains. Stays on site for faster debonding action.
50ml
For making crystal clear windows and bonding canopies and most plastics
Bonds wood, plastic, metal, painted surfaces. For glazing windows up to 6mm. Use with micro-tips.
DELUXE MATERIAL Liquid Gravity 240g pack
A brand new non-toxic, easy flowing, weighting system for scale military models, railway rolling stock, model planes, boats and cars. Specially designed to pour into small cavities and set in place with your favourite Roket cyano (AD43-46), or Speed Epoxy.
Use to improve electric conductivity and stability of rolling stock, adjust balance point of model planes, boats & submarines. 50ml bottle weighs almost 0.25 kilo!
Mr.Hobby MC-131
A new type of "BRUSH ON" type cement, with improved drying speed and adhesive strength! It is suitable for attaching fragile pastic parts together quickly. You must put together the plastic parts, and then brush on this cement on the gap between the two parts.
Pack of six micro tips and PTFE tubing for precise anti-clog application of Roket CA glues (AD43-46).
240ml pack, Balsa Tint.
Strong, lightweight filler which sands easily.
Use only where a strong joint is not required. Use for grain filling by applying with plastic sponge. Bonds: wood, foam, fibreglass. White or balsa tint for use in aeromodelling under clear covering film.
Mr. Finishing Surfacer 1500 gray 40 ml
MR.HOBBY SF289
Mr.Hobby SF287
This is a surfacer with primer (base filling paint).
The material used in Surfacer 1000, which is gaining overwhelming popularity for plastic models has been improved for this product.
Surface attachment has been enhanced not only for plastic models but also for metal in etched parts and resin.
Spray type and bottle type are available. Color is gray.
MR.HOBBY Mr.Dissolved Putty
MR.HOBBY P119
Mr.Dissolved Putty is a highly effective liquid sealant putty with even better viscosity than Mr.Surfacer 500.This product makes sealing rough sections of plastic models incredibly easy.
Mr.FINISHING SURFACER 1500 WHITE
MR.HOBBY SF291
Mr.Surfacer 1000
MR.HOBBY B519
Mr.SURFACER 1000 contains finer granules than Mr.SURFACER 500. They are both used in much the same way but ,due to the finer granules after sanding with waterproof sand-paper , a perfectly corrected surface is possible. Available in bottle and spray.
MR.WHITE PUTTY R
Mr.White Putty R is a low viscosity version of Mr.White Putty. Because of the reduced viscosity, it is easier to apply to a small area compared with the existing product. After it has hardened, it provides a smooth cutting quality extremely close to the original plastic model material.
DELUXE MATERIAL Roket cyano range
Highest quality cyanoacrylate adhesives.
All sold as 20g bottles.
Roket Odourless: Thick, maximum gap-filling adhesive; sets 10-20 sec.
Designed for use with precise Micro Tip anti-clog applicator (AC9).
Mr.Hobby Paint Tray 10pcs
Μεταλλικά Δοχεία για Ανάμειξη Χρωμάτων Η συσκευασία περιέχει 10 τμχ
DELUXE MATERIAL Perfect Plastic Putty 40ml
Fills fine gaps.
Creates invisible seams. Water clean up.
Perfect Plastic Putty is a one-part, fast-drying, superfine filler with good adhesion and sanding properties on plastic. Easily used, even in awkward areas with water clean up. Apply with small spatula, smooth and allow to dry.
Perfect Plastic Putty:
Plastic Magic 10 sec cement is a thin liquid plastic cement with a 10-15 sec adjustment time & non-clog action.
It is non-toxic, non-flammable with minimal odour and almost zero emissions when compared to competitors.
It bonds: styrene, plastic card, ABS & most kit plastics. It can be applied to one or both surfaces which can then be adjusted to a perfect position.
DELUXE MATERIAL Bonds plastics other glues cannot: Deluxe Materials new formula Plastic Magic is a liquid solvent glue that produces invisible glue lines.
The new safer formula can be applied with the Deluxe Materials Pin Flow solvent glue applicator (AC11) or conventionally with a fine paint brush. Plastic Magic bonds nearly all commonly used modelling plastics including polyester, acrylic, styrene, ABS, PVC, butyrate, and polycarbonate.
50ml
For fast assembly of card models eg. railway buildings and rockets.
Also bonds balsa wood, paper and card to most plastics. Use sparingly, align and press parts together for instant bond. Water clean up.
Precision, Fine glue lines,
Instant fit- Anti clog- No mess.
one piece glue tips for the accurate application of Deluxe Materials glues : Roket cyano, Roket Card, Super’Phatic! glue. Tips can be shortened or stretched for finer application.
Highest quality cyanoacrylate adhesives.
All sold as 20g bottles.
Roket Max: Thick, maximum gap-filling adhesive; sets 10-20 sec.
Designed for use with precise Micro Tip anti-clog applicator (AC9).
DELUXE MATERIAL Roket Powder 40g
Strengthening powder for use with thin cyano adhesives to improve gap filling and toughness.
Flows like liquid into spaces to take exact shape.
Use for filling gaps where strength is needed.
Sets in seconds with Roket Hot (AD43) or Rapid (AD44) cyano; can be filed, drilled and tapped.
DELUXE MATERIAL Roket cyano range
Highest quality cyanoacrylate adhesives.
All sold as 20g bottles.
Roket Rapid: Medium viscosity, fast setting adhesive; sets 5-10 sec.
Designed for use with precise Micro Tip anti-clog applicator (AC9)
DELUXE MATERIAL Sand 'n' Seal Wood Grain Sealer 250ml
A specially formulated wood grain sealer.
Coats and seals wood grain prior to painting and finishing. Use with all types of paints including enamel, cellulose, acrylic or epoxy.
Stir well before use. Apply with brush and allow to dry.
Sands beautifully after 60 mins.
Clean brushes with water.
Economical in use.
Low odour and non-flammable. Covers 1.5 sq metres.
100ml
Spray glue for the attachment of scenic materials, eg. scatter to trees or baseboards etc.
Non-staining. Dries clear and tacky. Gentle spray action.
A new range of high strength, rapid setting, epoxy glues that are formulated to set hard, clear and sandable, and tolerate mixing ratio errors. Packed in attractive boxes, each bottle has a new ‘witches hat’ free flowing nozzle with matching over-cap to match the label.
A new range of high strength, rapid setting, epoxy glues that are formulated to set hard, clear and sandable, and tolerate mixing ratio errors. Packed in attractive boxes, each bottle has a new ‘witches hat’ free flowing nozzle with matching over-cap to match the label.
DELUXE MATERIAL Roket cyano range
Highest quality cyanoacrylate adhesives.
All sold as 20g bottles.
Roket Hot: Super-thin, fast, penetrating adhesive; sets 1-5 sec.
Designed for use with precise Micro Tip anti-clog applicator (AC9).
Mr.SURFACER 1200
Mr.Hobby SF286
Mr.SURFACER 1200 contains finer granules than Mr.SURFACER 1000. They are both used in much the same way.
240ml
The next generation of strong lightweight fillers for foam and wood.
An easy sanding, strong, lightweight filler designed to fill small gaps and indentations. Easily applied and smoothed with a damp finger and then sanded back. Does not crumble like other lightweight fillers and can be over-coated with Foam Armour (BD50) for improved surface toughness, and finish before being painted.
Mr.Hobby Mr. Mark Softer NEO (40 ml) (Decal Softener)
Mr.Hobby MS-233
Low odour, liquid plastic cement with pin- point applicator
Hazard- free, non-toxic, plastic cement with a needle applicator.
