Home
-
-
There are 39 products.
Air Hose 1.7m
Air Hose 1.7m Diameter : 6 x 4mm Length : 1.7m Connector : 1 / 8''BSP - 1 / 8''BSP
Airbrush Air Hose 3m 1/8
Airbrush Air Hose 3m
Diameter : 6 X 4mm Length : 3m Connector : Both 1/8" BSP Female
Candy Golden Yellow Enamel
ALCLAD Candy Golden Yellow Enamel ALC-706
Alclad 706
Shake thoroughly before use. Do not thin. Apply over Aclclad Bright Silver Candy Base. Spray light coat at 20-25PSI. Wait 5 minutes. Apply further even coasts. Allow 5 minutes between each coat. Leave to cure for 2 hours before handling.
Compressor AS-186
Compressor AS-186
To προιόν αυτό βρίσκεται σε στοκ στο κατάστημα Νέας Σμύρνης ,τηλ:210-9348077
Power: 1/6 HP Speed: 1450/1700 r.p.m Air output per min./litres: 20~23L/min Auto stop, start at 3bar (43 psi), stop at 4bar (57 psi) Working pressure: 0~4 bar Air tank: 3.0L Weight: 5.2KG Dimension: 310x130x310mm .
Dual action Airbrush HS-30
Dual action Airbrush Feed Type:gravity
Nozzle: Dia. 0.30mmCup Capacity: 7CC Working pressure:15-50PSI
Klear Kote Semi-Matte ALC-312 Alclad
Alclad Klear Kote Semi-Matte
ALCLAD ALC-312
MIG-29 SMT Fulcrum C 1/48
GREAT WALL HOBBY MIG-29 SMT Fulcrum C 1/48
GREAT WALL HOBBY 4818
PRISMATIC AQUARIUS Turquoise to Blue ALC-206 Alclad
ALCLAD PRISMATIC AQUARIUS Turquoise to Blue ALC-206
ALCLAD ALC206
Prismatic Maple" Copper red to Green ALC-202 ALCLAD
ALCLAD Prismatic Maple" Copper red to Green ALC-202
ALCLAD ALC202
Prismatic Scarabeus ALC-201 Alclad
Prismatic Scarabeus ALC-201 Alclad paint
Alclad 201
Prismatic Titanium to Blue/Green ALC-207 ALCLAD
ALCLAD Prismatic Titanium to Blue/Green ALC-207
ALCALD ALC207
Transparent Green ALC-404 Alclad
Alclad Transparent Green ALC-404 Alclad
Alclad 404
White Primer Micro Filler ALC-306 Alclad
Alclad White Primer Micro Filler ALC-306
Alclad 306
Pre-thinned for airbrush application, Dries in 10 minutes, No sealer required, and Does not lift when masked. To obtain a great finish: The surfaces to be painted must be thoroughly clean and free from dust and fingerprints, Airbrush at 12-15 psi, and Airbrush 2-3 inches away from the model.
Airbrush cleaning pot
Airbrush cleaning pot
1. used for cleaning the residual paints (color) in airbrush
2. the cap can be used as palette
3. to be used as airbrush holder
F-15I IAF RA AM 1/48
GREAT WALL HOBBY F-15I IAF RA AM 1/48
GREAT WALL HOBBY 4816
Holomatic Spectral Chrome ALC-205 ALCLAD
ALCLAD Holomatic Spectral Chrome ALC-205
ALCLAD ALC205
Nozzle 0.3mm for HS-30 dual action Airbrush
Nozzle 0.3mm for HS30 dual action Airbrush
Spray booth with LED light
Specification
DC Motor: DC 12V 1.6A - Air Flow: 4 cubic meter/min -
Dimensions 48cm x 42cm x 36cm
T-33A "Shooting Star" Late Version 1/48
GREAT WALL HOBBY T-33A "Shooting Star" Late Version 1/48
GREAT WALL HOBBY 4821