Home
-
-
There are 36 products.
Candy Golden Yellow Enamel
ALCLAD Candy Golden Yellow Enamel ALC-706
Alclad 706
Shake thoroughly before use. Do not thin. Apply over Aclclad Bright Silver Candy Base. Spray light coat at 20-25PSI. Wait 5 minutes. Apply further even coasts. Allow 5 minutes between each coat. Leave to cure for 2 hours before handling.
Curtiss SC-1 Seahawk w/ wheels 1/72
KP MODELS Curtiss SC-1 Seahawk w/ wheels 1/72
KP MODELS 72376
Flex -I-File 600 grit abrasive tape
6 Ανταλλακτικές λωρίδες 600 βαθμών για το Flex I File
Flex I File Starter set
Flex-I-File gets into spaces that other tools cannot. Fitting perfectly into tight corners and interior angles even the tightest spot isn’t out of reach. Eliminate imperfections on your project by gradually progressing through the grits from coarse to fine.
Flex Pad Finisher 3 grits
1. Black area remove imperfections and scratches
2.White area smooths and satinizes
3.Vigorous buffing with gray side produces bright,high gloss finish
FLEX-I-FILE 3210
Klear Kote Semi-Matte ALC-312 Alclad
Alclad Klear Kote Semi-Matte
ALCLAD ALC-312
MiG-21 UM Warsaw Pact Service 1/72
KP MODELS MiG21 UM Warsaw Pact Service 1/72
KP MODELS 72108
P-51B Mustang 'Malcolm hood', USAAF 1/72
KP MODELS P-51B Mustang 'Malcolm hood', USAAF 1/72 P51
KP MODELS 7230
PRISMATIC AQUARIUS Turquoise to Blue ALC-206 Alclad
ALCLAD PRISMATIC AQUARIUS Turquoise to Blue ALC-206
ALCLAD ALC206
Prismatic Maple" Copper red to Green ALC-202 ALCLAD
ALCLAD Prismatic Maple" Copper red to Green ALC-202
ALCLAD ALC202
Prismatic Scarabeus ALC-201 Alclad
Prismatic Scarabeus ALC-201 Alclad paint
Alclad 201
Prismatic Titanium to Blue/Green ALC-207 ALCLAD
ALCLAD Prismatic Titanium to Blue/Green ALC-207
ALCALD ALC207
Spitfire Mk.IA 'Export & Egypt' 1/72
KP MODELS Spitfire Mk.IA 'Export & Egypt' 1/72
KP MODELS 72277
To προιόν αυτό βρίσκεται σε στοκ στο κατάστημα Νέας Σμύρνης ,τηλ:210-9348077
Transparent Green ALC-404 Alclad
Alclad Transparent Green ALC-404 Alclad
Alclad 404
White Primer Micro Filler ALC-306 Alclad
Alclad White Primer Micro Filler ALC-306
Alclad 306
Pre-thinned for airbrush application, Dries in 10 minutes, No sealer required, and Does not lift when masked. To obtain a great finish: The surfaces to be painted must be thoroughly clean and free from dust and fingerprints, Airbrush at 12-15 psi, and Airbrush 2-3 inches away from the model.
Henschel Hs-126 B-1 Mediterranean 1/72
KP MODELS Henschel Hs-126 B-1 Mediterranean 1/72
KP MODELS 72337
Holomatic Spectral Chrome ALC-205 ALCLAD
ALCLAD Holomatic Spectral Chrome ALC-205
ALCLAD ALC205
Spitfire LF Mk.IXE/C 1/72
KP MODELS Spitfire LF Mk.IXE/C 1/72 Cz Police, Greek AF, Italian AF
KP MODELS 7267