Home
-
-
There are 30 products.
Candy Golden Yellow Enamel
ALCLAD Candy Golden Yellow Enamel ALC-706
Alclad 706
Shake thoroughly before use. Do not thin. Apply over Aclclad Bright Silver Candy Base. Spray light coat at 20-25PSI. Wait 5 minutes. Apply further even coasts. Allow 5 minutes between each coat. Leave to cure for 2 hours before handling.
Klear Kote Semi-Matte ALC-312 Alclad
Alclad Klear Kote Semi-Matte
ALCLAD ALC-312
MIG-29 SMT Fulcrum C 1/48
GREAT WALL HOBBY MIG-29 SMT Fulcrum C 1/48
GREAT WALL HOBBY 4818
Milliput Epoxy Putty - Turquoise Blue
Milliput Epoxy Putty - Turquoise Blue
Milliput Epoxy putty Standard Yellow - Grey
Milliput Epoxy putty Standard Yellow - Grey
Εποξικός Στόκος δυο συστατικών 113.4g
Milliput Super Black
Milliput Super Black
Each package contains two separate bars, one of which is a hardener. Upon mixing an equal quantity of each different bar the material starts to harden, and hardens fully in 90 minutes, after which it can be carved, sanded, drilled, and sculpted over.
Milliput Superfine White
Milliput Superfine White
Το Milliput Superfine White είναι ένας εξαιρετικός εποξικός στόκος για την αποκατάσταση κεραμικών, πορσελάνη, κορνίζων και χρησιμοποιείται ακόμα και για μοντελιστικές ιδιοκατασκεύες
Τα δύο μπαστούνια ανακατεύονται 50/50 και ο στόκος στεγνώνει εντελώς εντος 2-3 ώρων. λίγα λεπτά.
Ο στόκος γυαλοχαρτίζεται, τρυπιέται, βάφεται.
PRISMATIC AQUARIUS Turquoise to Blue ALC-206 Alclad
ALCLAD PRISMATIC AQUARIUS Turquoise to Blue ALC-206
ALCLAD ALC206
Prismatic Maple" Copper red to Green ALC-202 ALCLAD
ALCLAD Prismatic Maple" Copper red to Green ALC-202
ALCLAD ALC202
Prismatic Scarabeus ALC-201 Alclad
Prismatic Scarabeus ALC-201 Alclad paint
Alclad 201
Prismatic Titanium to Blue/Green ALC-207 ALCLAD
ALCLAD Prismatic Titanium to Blue/Green ALC-207
ALCALD ALC207
Transparent Green ALC-404 Alclad
Alclad Transparent Green ALC-404 Alclad
Alclad 404
White Primer Micro Filler ALC-306 Alclad
Alclad White Primer Micro Filler ALC-306
Alclad 306
Pre-thinned for airbrush application, Dries in 10 minutes, No sealer required, and Does not lift when masked. To obtain a great finish: The surfaces to be painted must be thoroughly clean and free from dust and fingerprints, Airbrush at 12-15 psi, and Airbrush 2-3 inches away from the model.
F-15I IAF RA AM 1/48
GREAT WALL HOBBY F-15I IAF RA AM 1/48
GREAT WALL HOBBY 4816
Holomatic Spectral Chrome ALC-205 ALCLAD
ALCLAD Holomatic Spectral Chrome ALC-205
ALCLAD ALC205
Milliput Terracotta
Milliput Terracotta 113.4gr 2 part epoxy putty
Milliput is a versatile manipulative two part epoxy putty which when mixed together sets rock hard. When first mixed, the putty is pliable and easily shaped. By wetting the Milliput with a finely woven moist cloth a very smooth finish can be easily obtained.
T-33A "Shooting Star" Late Version 1/48
GREAT WALL HOBBY T-33A "Shooting Star" Late Version 1/48
GREAT WALL HOBBY 4821