Odourless Cyanoacrylate

DELUXE MATERIAL Eze Dope 250ML

A specially formulated water soluble dope for shrinking, strengthening and wind-proofing model tissue paper.

It is non flammable, has little odour and dries rapidly to a semi-matt finish. Use to apply tissue decoration to all types of foam.

Precision, Fine glue lines,

Instant fit- Anti clog- No mess.

one piece glue tips for the accurate application of Deluxe Materials glues : Roket cyano, Roket Card, Super’Phatic! glue. Tips can be shortened or stretched for finer application.

A lightweight, non-sagging scenic modelling material for the creation and casting of realistic diorama groundwork.

Create and Shape can be moulded and smoothed with a soft wet brush before completely dry.

It dries without cracking to a material with great structural integrity bonding wood, plaster, plastic, foam etc. It can be cut, sawn and filed to shape when dry without crumbling like other products and then glued and coloured with acrylic for beautiful scenic effects. Ideal for repairs and special scenic projects where strength and durability is required.

240ml pack, Balsa Tint.

Strong, lightweight filler which sands easily.

Use only where a strong joint is not required. Use for grain filling by applying with plastic sponge. Bonds: wood, foam, fibreglass. White or balsa tint for use in aeromodelling under clear covering film.

A new range of high strength, rapid setting, epoxy glues that are formulated to set hard, clear and sandable, and tolerate mixing ratio errors. Packed in attractive boxes, each bottle has a new ‘witches hat’ free flowing nozzle with matching over-cap to match the label.

51g/sq m (1 sq metre)

For laminating.

Unique fabric finish for better “wetting out” and strength. Use with Eze-Kote or Aeropoxy

500ml

Laminating and finishing resin for balsa and foam models.

Eze-Kote is a 1-part water based foam-safe, low odour, resin alternative to epoxy. Brush onto balsa and light glass cloth to create a tough, ding and fuel resistant film that can be sanded easily and painted after 20-30 mins.

Coverage: 75ml covers approx

1m² /coat

Plastic Magic 10 sec cement is a thin liquid plastic cement with a 10-15 sec adjustment time & non-clog action.

It is non-toxic, non-flammable with minimal odour and almost zero emissions when compared to competitors.

It bonds: styrene, plastic card, ABS & most kit plastics. It can be applied to one or both surfaces which can then be adjusted to a perfect position.

78g/sq m (1 sq metre)

For laminating.

Unique fabric finish for better “wetting out” and strength. Use with Eze-Kote or Aeropoxy.

240ml

The next generation of strong lightweight fillers for foam and wood.

An easy sanding, strong, lightweight filler designed to fill small gaps and indentations. Easily applied and smoothed with a damp finger and then sanded back. Does not crumble like other lightweight fillers and can be over-coated with Foam Armour (BD50) for improved surface toughness, and finish before being painted.

Multi-purpose gap-filling canopy glue. Thick & tacky, dries clear, remains flexible. Bonds combinations of wood, plastic, fabric, foil, painted surfaces. Ideal for:

• Aeroplane canopies

• Model boat plastic windows

• Sealing gaps & small holes

• Repairing tears in covering film

• Application of rivets on scale models.

100ml

Spray glue for the attachment of scenic materials, eg. scatter to trees or baseboards etc.

Non-staining. Dries clear and tacky. Gentle spray action.

50ml spray bottle

Spray which permits Roket CA (AD43-46) to bond difficult surfaces and accelerate the cure.

Pre-condition surfaces and then apply Roket CA (AD43-46) for instant bond.

Low odour, liquid plastic cement with pin- point applicator

Hazard- free, non-toxic, plastic cement with a needle applicator.

Pack of six micro tips and PTFE tubing for precise anti-clog application of Roket CA glues (AD43-46).

Debonder and dissolver of superglue.

Releases bonded skin and removes superglue stains. Stays on site for faster debonding action.