Κωδικός: A-1/8-15
Σωλήνας αερογράφου Paasche 4.5m
Braided air hose with couplings. The coupling at the airbrush end is fitted with an O-Ring to prevent air leaks. 100 psi maximum. Braided air hose.
Fits Paasche pen type airbrushes. Has 1/4 NPT fitting on compressor end.
Σωλήνας αερογράφου Paasche 4.5m
Braided air hose with couplings. The coupling at the airbrush end is fitted with an O-Ring to prevent air leaks. 100 psi maximum. Braided air hose.
Fits Paasche pen type airbrushes. Has 1/4 NPT fitting on compressor end.
Σωλήνας αερογράφου Paasche 4.5m
Braided air hose with couplings. The coupling at the airbrush end is fitted with an O-Ring to prevent air leaks. 100 psi maximum. Braided air hose.
Fits Paasche pen type airbrushes. Has 1/4 NPT fitting on compressor end.
Talon Paasche airbrush
Αερογράφος διπλής λειτουργίας εσωτερικής μίξης ,το κιτ περιέχει ,ενα κλειδάκι άλλεν ,2 μεταλλικά κλειδάκια ,μια υφασμάτινη σωλήνα 1.8m
O αερογράφος παρέχεται με βελόνα 0,38mm,και υποστηρίζεται απο πλήρη σειρά ανταλλακτικών
(Eναλλακτικά μπορεί να δεχθεί βελόνα 0,25mm ή 0.66mm)
Paasche A-202 Air Hose Adapter - Connect a Paasche Airbrush to Iwata Air Hose
A-151 Adapter
Adapter – Badger Airbrushes to use Paasche Air Hoses.
Paasche A-151
PAASCHE Adapter - Connect Iwata Airbrushes to use Paasche Air Hoses
Paasche A-188
PAASCHE O-RING (6PCS) used on all current Paasche Airbrushes
PAASCHE A-53
Air Hose 1.7m Diameter : 6 x 4mm Length : 1.7m Connector : 1 / 8''BSP - 1 / 8''BSP
Paasche VLT-1 Airbrush tip Tip for VL, VLS, MIL & SI series airbrushes 0.55 mm.
PAASCHE Adapter - Connect Iwata Airbrushes to use Paasche Air Hoses
Paasche A-188
A-151 Adapter
Adapter – Badger Airbrushes to use Paasche Air Hoses.
Paasche A-151
Paasche VLA-1 Aircap Size (0.55mm) Paasche VLA-1 Paasche VLA1
Talon Paasche airbrush
Αερογράφος διπλής λειτουργίας εσωτερικής μίξης ,το κιτ περιέχει ,ενα κλειδάκι άλλεν ,2 μεταλλικά κλειδάκια ,μια υφασμάτινη σωλήνα 1.8m
O αερογράφος παρέχεται με βελόνα 0,38mm,και υποστηρίζεται απο πλήρη σειρά ανταλλακτικών
(Eναλλακτικά μπορεί να δεχθεί βελόνα 0,25mm ή 0.66mm)
PAASCHE HN-1-3 NEEDLE ,
H Needle (For Head Sizes 0.45 mm & 0.65 mm)
PAASCHE HN-1-3
Needle TN-1 0.25mm for TALON TG -TGX
Paasche TN1
The FP flow pencil similar to a fountain pen in that it flows the paint out the nib instead of spraying it. The FP is used extensively for pin striping, taxidermy, cake decorating Special fx etc. No air source needed. Comes with 4 size nibs. Lay down fine line with no overspray. Does not use a compressor. Comes with 1/16, 1/32,1/64 3/64 size nibs. Optional ALP-45 pressure cup for thicker paints
Fast release of connection of Paasche Airbrush to air hose. Fits between Paasche hose and Paasche airbrush.
Paasche A-191 Paasche A191
PAASCHE HC-1-3 AIRCAP 0.45 mm & 0.65 mm)
PAASCHE HC-1-3
Paasche Handle And Stop Assembly For TG And TS Airbrushes. Handle and stop assembly for TG and TS airbrushes For TG or TS model airbrushes. Complete handle with needle stop. Made in the USA.
Paasche TAL-34
Paasche TAL34
Σωλήνας Αερογράφου υφασμάτινος 3 μέτρων
Διάμετρος : 6 X 4mm Μήκος : 3m Σύνδεση : 1/8" BSP Θυληκό
